2016 Napa Valley Coffin Races Coffin Specifications
All coffins must meet the following specifications. Coffins will be inspected prior to the race. Coffins not meeting specifications will be disqualified at time of inspection.
1. Coffin specifications: Size -minimum 2 feet wide by 5 feet long
Size - maximum: 3 feet, 10 inches wide (46 inches), INCLUDING HANDLES, by 8 feet long
There is no minimum or maximum height specification for the coffin or handles.
2. Each coffin must have 4 firmly attached wheels, attached in such a manner so that coffin will roll on all 4 wheels when propelled down the race course. Wheels are not to exceed 8”in diameter, including tires. Wheels must be within the overall dimensions of the coffin. Castersmay be used. For safety and steering ability wheels
or casters may rotate or swivel!
3. Ropes used for pulling coffins will not be permitted. Four handles must be securely attached to coffin. A Push bar on the front & rear of the coffin instead of 2 handles will be permitted.
4. Functional steering mechanisms are prohibited.
5. Decorative projections will be allowed, not to exceed the maximum width and length of the Coffin. Decorations may extend up without limitations.
6. All (coffin riders) must weara helmet during the race. Protective gear for runners is highly recommended but not required.
7. The registration number must be visible on the front of the coffin.
1. Coffin specifications: Size -minimum 2 feet wide by 5 feet long
Size - maximum: 3 feet, 10 inches wide (46 inches), INCLUDING HANDLES, by 8 feet long
There is no minimum or maximum height specification for the coffin or handles.
2. Each coffin must have 4 firmly attached wheels, attached in such a manner so that coffin will roll on all 4 wheels when propelled down the race course. Wheels are not to exceed 8”in diameter, including tires. Wheels must be within the overall dimensions of the coffin. Castersmay be used. For safety and steering ability wheels
or casters may rotate or swivel!
3. Ropes used for pulling coffins will not be permitted. Four handles must be securely attached to coffin. A Push bar on the front & rear of the coffin instead of 2 handles will be permitted.
4. Functional steering mechanisms are prohibited.
5. Decorative projections will be allowed, not to exceed the maximum width and length of the Coffin. Decorations may extend up without limitations.
6. All (coffin riders) must weara helmet during the race. Protective gear for runners is highly recommended but not required.
7. The registration number must be visible on the front of the coffin.